Working with Vlans

Working with Vlans

sw1>en
Password: 
sw1#conf
sw1#configure t
Enter configuration commands, one per line.  End with CNTL/Z.
sw1(config)#int
sw1(config)#interface fa
sw1(config)#interface fastEthernet 0/1
sw1(config-if)#swi
sw1(config-if)#switchport mod
sw1(config-if)#switchport mode access
sw1(config-if)#

sw1(config)#interface fastEthernet 1/2
%Invalid interface type and number
sw1(config)#interface fastEthernet 2/1
sw1(config-if)#swit
sw1(config-if)#switchport mode
sw1(config-if)#switchport mode access

sw1(config)#interface vlan 1
sw1(config-if)#description FOR HR DEPARTMENT
sw1(config-if)#ip add
sw1(config-if)#ip address 192.168.0.3
sw1(config-if)#ip address 192.168.0.3 255.255.255.0
sw1(config-if)#no shut


sw1(config)#interface vlan2
sw1(config-if)#description FOR ENG DEPARTMENT
sw1(config-if)#ip add
sw1(config-if)#ip address 192.168.1.3 255.255.255.0
sw1(config-if)#no shut

sw1(config)#interface FastEthernet2/1
sw1(config-if)#
sw1(config-if)#
sw1(config-if)#switchport access vlan 2


sw1(config)#interface fastEthernet 3/1
sw1(config-if)#swit
sw1(config-if)#switchport mode trunk
do wr